Responsibilities and duties
- Check /inspect any defect / damages to the equipment before start of work.
- Inspect the RTG and fill – in the checklist on weekly basis.
- Report and engine trouble or other defects during operations to avoid further damage.
- Initiate proper log-in and log-off on VMT and GAHEZ System.
- Update all container movements in the system for grounding and shifting.
- Take special care on trucks with side panels.
- Ensure that the CT Supervisor or Forman is present when cross or travelling the RTG.
- Ensure both runways are clear before travelling the RTG.
- Undertake routine cleaning of cabin and windows.
- Ensure safety and correct parking of RTG during bad weather or after operations.
- Strictly follow the storm and bad weather procedure.
- Hand-over all necessary information regarding the status of the equipment, VMT unit to the next shift operator.
- Ensure that the boom is clear of any obstructions such as the ship’s Mast, ship’s Radar and Antenna when travelling the Quay crane
- Secure the cabin position in the back-reach before travelling to any desired direction, to have a wide view and check for any obstructions at the crane railways
- Report any vessel damage noticed to hatch man
- Take special care in handling OOG cargoes and hatch covers
- Do not move the crane until the vessel is completely secured
- When operations are finished completely, boom – up, shut off and anchor the crane
- Undertake routine cleaning of cabin and windows from inside
- Inspect the crane and fill Gahez Application pre- starting the work
- Strictly follow the storm and bad weather procedures
- Contribute to achieving the company targets by following QHSE rules and regulations for operating and maintenance procedures related to job activities.
- Report and respond immediately as appropriate to any hazardous condition/act.
Qualification And Certificates
- Above Intermediate Educational Degree
- Skill Level Measurement Certificate
- Professional and Occupational License
- Equipment driving license
- Work Experience in terminal operations 1-2 years in the same roles
- Fully Conversant with Safety Procedures